Content:
Mold or mold on the walls of the room is not only aesthetically unpleasant, but also very dangerous. Experts have long identified its negative factors of impact on the health of a person living in the house where this unpleasant "enemy" appeared.
Mold fungus affects the immune system, causing headaches, various allergic reactions, and also contributes to the development of respiratory diseases, especially children and people with weak immunity.
Content
Mold on the walls
In this article, we will mainly talk about how to get rid of mold on the walls of your sweet home, because it is not only an unpleasant smell, but also a repulsive "design", but above all a bad feeling for you and your loved ones.
So, it is worth highlighting the main causes of mold fungus:
- Firstly, this is an excessively dark room and almost unlit by natural light;
- Secondly, a high level of humidity;
- Thirdly, high air temperature;
- Fourthly, the room heats up unevenly.
All this contributes to the development and spread of the terrible zygo- and ascomycetes, as this type of fungus is scientifically dubbed. The reasons are listed for a reason, because in order to get rid of mold spores forever, you need to eliminate the very root of the problem, otherwise all the work will go down the drain. If you do not start fighting mold at the initial stage, then it grows and can "capture" an incredibly large piece of territory.
Of course, in a neglected state, everyone recognizes mold, but how to recognize it at the very beginning? It's very simple, take a piece of cloth and, soaking it in bleach, wipe the moldy area, if after that the surface with suspicious darkening began to lighten, then you are dealing with mold.
Another sign of mold formation is an unpleasant and pungent odor that appears in the first stages. Unfortunately, it is not enough just to scrape off and wash the affected area, you need to do everything in a complex, restoring, first of all, the correct microclimate in the room.
Effective ways to fight mold
- Antiseptic primer
It is considered one of the best and proven by millions of people product, which is sold in absolutely any building materials store. What is good about an antiseptic primer? It eliminates mold once and for all and prevents it from forming on the walls again.
Beforehand, you need to clean the affected surface from mold, and if we are talking about a plastered wall, then do not be afraid to scrape it down to the base, because leaving even a millimeter, you risk seeing the "uninvited guest" again. Then you can apply the product to a dry surface with a paint brush.
- Baking soda is the perfect mold killer
It is a natural and non-hazardous cleaner that is safe for all inhabitants of the house, except for mold.
Dissolve one teaspoon of baking soda in a glass of water, and then spray the resulting mixture on the contaminated surface. This miracle method is perfect for any walls, and even for things, for example, carpets, which can be washed with a sponge soaked in a soda solution. By the way, you should not wash off the product afterwards, since soda itself remarkably protects the surface from the recurrence of fungus.
Mold in the bathroom
It is the bathroom that is most susceptible to the appearance of mold of various types, since it is there that ultraviolet light often does not penetrate, which does not give fungal spores life. Of course, constant washing and high humidity also contribute to the formation of fungal "growth" on the tiles and walls of the bathroom.
- Bleach is an excellent opponent in the fight against mold
Of course, it is not as effective as an antiseptic primer, but it can also be get rid of mold, especially since bleach is less toxic. Thanks to sodium hypochlorite, which is present in the composition of any bleaching agent, you can "kill" the fungus and its spores in a matter of minutes.
It will perfectly clean any tile, glass, floor, but it should be remembered that its most important disadvantage is discoloration, which can spoil the saturated coating. By the way, this "execution" must be done in a respirator, otherwise poisonous fumes will cause irreparable harm to health. After completing the procedure, be sure to ventilate the room.
Соблюдайте правильную пропорцию, а именно один колпачок отбеливателя на десять колпачков воды.
- Vinegar
The most ordinary table vinegar is perfect in the fight against moulds в вашей ванной комнате. Один из плюсов данного средства — отсутствие вредных испарений.
Vinegar should be sprayed on the affected surface with a sprayer, if there is no such sprayer, then wipe the "infected place" with a cloth soaked in vinegar, and after an hour, feel free to rinse the tiles with water and be sure to let the room ventilate. The procedure must be carried out once a week and after a while the mold will disappear forever.
- 3% hydrogen peroxide solution
This is the best non-toxic antifungal weapon that can be purchased at the nearest pharmacy in the city. It is applied similarly to vinegar, but has one disadvantage - it can corrode the painted surface, so it is better to use this product in the bathroom.
- Ammonia will quickly kill the most terrible mold
It is excellent in the fight against fungal "growth" on tiles and other areas of the bathroom. Mix ammonia with water, in a percentage of fifty to fifty, then spray the mixture on the affected area, and then leave for several hours, then rinse thoroughly with water.
Carry out all these procedures in a special mask and gloves, and remove pets.
Summing up, it is worth remembering that almost all removal, getting rid of mold dangerous to health, and it's not only about the poisonous fumes emitted by the agent that was applied to the damaged area, but above all about the culprit of the event herself. Mold spores can get on the skin and respiratory tract during interaction, and this is already a serious problem, as it can lead not only to allergies, but also to the development of serious ailments.